König Sanding Sealer 500ml

König Holz und Harz sanding primer is a sanding sealant that makes sanding wooden surfaces easier. It does not close the pores, strengthens and expands the wood fibers. This ensures a noticeably better sanding result and a very smooth surface. The sanding primer is the perfect base for waxed or high-gloss surfaces.

It is recommended to use a sanding primer after the first sanding.

Ingredients

Alcohol solution with shellac

Why use the Sanding Primer - Sanding Sealer?

By applying the sanding sealer from König Holz und Harz while sanding, you can remove the raised wood fibers.

During sanding, some wood fibers are squashed and not completely removed. Even though the surface may appear smooth after sanding, the flattened wood fibers will rise again as soon as a finishing product is applied.

If you apply the sanding primer before and during sanding, the folded fibers will act, straighten and harden. Because they remain in a fixed position through the drying process, they can be completely removed during the further sanding process. Curing takes only a few minutes.

Special features of König Holz Synthetic Resin Sanding Primer

• Made in Germany
• No additives
• No cellulose
• No nitro thinner
• Dries very quickly

What can the Sanding Sealer be used for?

As a basis for wax surfaces, carnauba resin, polishing pastes or the friction polish from König Holz and resin.

Sanding sealer is an ideal base for high-gloss surfaces.

When the surface must be as smooth as possible, for example on hand polishers.

For an even smoother surface when sanding

Applying the sanding primer to open-pore end grains will prevent the end grain from becoming darker than the rest of the surface.

Stocked types of wood can also be strengthened with the sanding primer.

Application of König Holz und Harz Sanding Primer

The sanding primer can be used immediately and does not need to be shaken before use. It should be stored at room temperature.

The wood must be dry before processing. It can also be used on wet wood. The drier the wood, the better.

The sanding base is equally suitable for hard and soft wood.

The surface must be untreated.

König Holz und Harz Abrasive paste can be used coarsely for the first application.

Gloves are recommended when working with the König Holz Resin Abrasive Paste, as the alcohols can dry out the skin. Sand the workpiece with the first grit first, depending on how good the surface is. Then apply a little sanding primer with a cloth. Wait 2-3 minutes and then sand with the next grit. Repeat if necessary until you reach the desired grit.

Application can be done both on the lathe and on the workbench.